Rethink clean
Clear glass doesn’t come from washing it, it comes from protecting it.
Think a hotel scrubs its glass every day? Hundreds of rooms, and nowhere near enough hands to wipe them all daily. The glass stays that clear because it was coated from the start, after that it’s a quick rinse and a wipe, 20 seconds and you’re done. Airbnb hosts do the same. It’s 2026, stop standing there wiping glass.
Real clean isn’t about how hard you scrub, it’s about getting it right from the start.
Unprotected glass · yours
Bare glass. Hard-water minerals seep in, layer by layer, deeper and deeper, cloudy in months, and no amount of scrubbing brings it back.
Protected glass · still clear in 10 years
Coated from day one, like a non-stick pan, it bonds into the glass, water slides off, a quick rinse and it’s clean. Still clear years later.
Glass that’s still clear years later wasn’t scrubbed that way. It was protected, from day one.
See the difference
Same water! On the coated half, water just slides off.
On the treated side, water can’t grip, it beads into droplets and runs straight off, taking soap and minerals with it. The untreated side dries with everything still clinging to the glass. That’s the whole product, in one photo.
90%
less scrubbing
3 yrs
stays like-new
1
application
See it work
Don’t take our word. Watch the water.
Manufacturer footage, no edits, just water meeting glass that’s been treated with EnduroShield. On the treated side it runs straight off; on plain glass every drop clings and dries into spots.
The bucket test
Why water won’t cling
Coated vs uncoated
Before & after
15-second demo
Treated vs untreated mirror
Why glass gets water stains
Why do some water stains wipe off, and some never do?
It has nothing to do with which cleaner you use. It has everything to do with what your glass is made of.
Your glass is made from 3 things
Silica sand, limestone and soda ash. Melted together at over 1500°C, then cooled and cut into sheets.
Doesn’t matter if you bought the expensive one or the cheap one. All renovation glass is these same 3 things.
The problem comes from what the soda ash brings in: sodium.
How glass is made · the yellow dots are sodium left inside the glass
The moment water sits on your glass, it starts
Hydrogen in the water swaps places with the sodium on your glass surface. The sodium comes out, stays in the water, and becomes sodium hydroxide.
In plain words: the water sitting on your glass turns alkaline.
Hydrogen goes in, sodium comes out · the sodium turns the water alkaline
Here is the key. Water evaporates. Alkali doesn’t.
You didn’t wipe it dry. You didn’t squeegee it. So that layer of water dries on its own.
Less and less water. Same amount of alkali. So it gets stronger and stronger.
You think your glass is slowly drying. What is really happening is the alkali on it is slowly getting stronger.
The water leaves, not one bit of alkali does · past 9 it starts etching the glass
Past pH 9, your glass starts getting etched
Normal water is pH 7. Once the alkali on your glass goes past 9, it starts etching the silica structure on the surface.
Your glass turns rough and loses its shine. Zoom in and you see tiny pits your eyes can’t catch.
This isn’t dirt. This is your glass structure, damaged.
So water stains come in 2 stages
While your glass is still new, it’s soap scum, body oil and a bit of mineral from the water, sitting on the surface. At this stage it still wipes off.
Later on, the surface already has plenty of pits. Once dirt falls in, it soaks into your glass. Your cloth can’t reach the bottom of a pit, and the pits scatter the light.
At this point no cleaner will help. That is how permanent water stains happen.
To be fair, your glass doesn’t break tomorrow because it touched water today. This is slow. So slow you can’t see it, so slow you never think of it as a problem.
But it only goes one way. It doesn’t reverse on its own. Once you get there, you either pay someone to polish it, or you replace the glass.
What damages your glass isn’t the water. It’s the drying, and that layer of alkali getting stronger and stronger.
So while your glass is still new and still clear, spray a layer of EnduroShield Coating to bond into the glass, so water can’t sit there. Water hits it, beads up and slides off by itself.
One spray lasts 3 years. Keeps your glass looking like the day it was renovated.
The real cost
Let the water stains build up, and they’ll drain your money and energy.
Water marks feel free to ignore. They aren’t. Leave the glass unprotected and you pay for it, in more ways than one.
One kit. One Saturday. From RM218.
Or keep paying for everything above, for as long as you own this home.
Life with it
With EnduroShield vs without.
From real Malaysian customers
Real names. Real posts. Unedited.
Real reviews customers posted publicly online, their names, their photos, their words. Untouched screenshots.
Swipe to browse · auto-scrolls
What buyers say
312 real homes turned the hassle of wiping glass into just one easy little thing.
★★★★★
4.8 / 5
312 verified reviews
Who this is for
Who really needs to coat their shower glass?
Best time is right after a reno or a move, coat the glass while it’s still new. Wait till it’s stained and it’s too late.
⚠️ Glass already cloudy and won’t wipe off? The stain has seeped into the glass. A coating stops this on new glass, it can’t undo old scale. Clean it back as far as it will go first, then coat it. Get your free delivery code →
How it works
Australian nano-tech bonds the coating into your glass, for at least 3 years!
Here’s the simple version, this coating is built to grab onto every microscopic groove on the glass surface, fill them in and hold tight. It’s not a film stuck on top that peels off, so it can’t wash away.
The same formula, used on big industrial projects (hotels, airports, the machine-applied stuff), lasts at least 10 years. We put that exact formula into a DIY kit you spray yourself at home, rated to last at least 3 years.
Bond
It chemically bonds into the glass, not a film on top, so it can’t peel or wash away.
Slide
Water and soap scum can barely grip, every drop beads up and rolls off.
Clean
A quick rinse or vinegar wipe is all it takes, no scrubbing, no harsh chemicals.
A clear coating that grips the glass, far too thin to see or feel. It works like a non-stick pan.
(Measured light transmission: 89.55% → 89.57%, practically no change. Your glass stays just as clear.)
Do it yourself, in 3 steps
No need to pay a pro! 3 DIY steps to a pro-grade finish.
No installer, no special tools, everything you need is in the box.
Watch a real DIY
The whole job, in one clip
Application demo
2-step DIY, real bathroom
On a window, same steps
Real review, 90% less cleaning
Real proof, water beads off
Certified & independently tested
Certified in Germany. Ranked #1 in the lab.
TÜV Rheinland in Germany certified it. An independent lab put it up against 6 other coatings and it came out on top. Tap any document below to read it yourself.
The scrub test
It survived 1,000 scrubs. Six other coatings did not.
The lab rubbed all seven coatings 1,000 times with an ordinary kitchen sponge and everyday cleaner, back and forth. No bleach, nothing harsh.
By the end, water and oil were sticking to the other six again. On EnduroShield the water still slid straight off, and it held the best oil resistance in the whole test.
101.8° → 83.2°
Water still beading after 1,000 scrubs. The other six fell to around 30.
Want to check it yourself? The full Intertek test report is in the cards below.
⚲TÜV Rheinland Certificate
Reg. Q-60039967 · Germany
⚲TÜV Rheinland Award
Hydrophobic coating system
⚲Intertek Test Report
Independent performance evaluation
⚲Abrasion & contact-angle data
ASTM C813 / D2486 results
‹
›
Durability lab-tested to simulate 10 years of bathroom use.
Passed UV, chemical, heat-shock, mechanical and adhesion tests.
Spray it, wipe it or use a spray gun. Same result, no top-up needed.
The same coating chemistry trusted on landmark glass worldwide.
Now picture a few years from now. Friends are over for dinner. One of them uses your bathroom, comes back, and says, half surprised, “Wait… how long have you lived here? It still looks brand new.” You just smile. Because you did one small thing right, the week you moved in.
That’s what EnduroShield is really for, a home that keeps looking like the day you got the keys, and quietly tells everyone who visits that you take care of what’s yours.
Seen at the world’s glass shows
Even the glass pros show up for this brand.
This isn’t a random bottle off a shelf. You’ll find the EnduroShield booth at the biggest glass shows on earth, Glasstec in Germany, China Glass in Shanghai, where the people who make glass for a living come to look.
Glasstec · Düsseldorf, Germany, the world’s #1 glass industry event
50+
countries
20 yrs
proven
#1
glass show
Coated on 1 million+ bathrooms worldwide
Picture how easy the glass is to clean once it’s coated!
Shower glass, mirrors, outdoor windows, glass railings, one kit coats them all. Water hits and beads straight off, cutting most of the wiping out of your week. Everything below is unedited, shot by real customers.
1M+
homes worldwide
50+
countries
20
yrs of formula
Coating a shower glass panel
Applying with the included cloth
Starting the DIY
Treating a glass door
Treating a bathroom glass door
Treating a glass pool fence
Real customers · real results
Real homes. Real results.
From Datin Rajee’s 12-month shower to first-timers a few months in, real homes, real results. Swipe through.
Datin Rajee · 12 months on
One year, never cleaned
3 months later, explained
How I clean mine
If you know, you know
Choose your kit
3 sizes. Same formula.
Every kit contains the identical coating, you’re just choosing how much glass you’re covering.
Not sure which one? Just go by how much glass you’re spraying ,
One bathroom, one shower screen → Standard is enough. (A typical condo shower door is about 3ft×8ft, roughly 48 sq ft double-sided. Standard covers 40 sq ft, and that’s plenty, it’s a thin, even layer, so a little more or less doesn’t matter.)
Two or three bathrooms / most people → go Family, best value. ✅
Whole house, mirrors, balcony, glass railings too → go Pro.
🛠️ No experience needed: if you can use a spray bottle and wipe with a cloth, you can do this · about 30 min of actual work · all tools included · step-by-step video · free re-supply if it fails within 3 years.
Straight talk before you buy
Two guarantees. You’re covered.
The whole job is just wiping it on by hand, about 10 minutes a screen. That’s all the “risk” there is, watch:
Guarantee 01
The 3-Year Clear-Glass Promise
Coat within 30 days and email a short clip of the water beading to hello@enduroshieldpro.com, that locks in 3 years of cover. If a coated screen ever stops beading inside 3 years, we mail you a free refill.
Guarantee 02
30-Day Sealed-Kit Returns
Changed your mind? If the kit is still sealed, send it back within 30 days for a full refund. No questions, no friction.
Before you buy
