Not sure if your water markswill wipe off?Test before you buy EnduroShield
Try one small spot at home. You will know in 30 minutes.
Start the test
See howothers do it
Our approach follows what these people show. Tap a video to watch it on YouTube. All videos belong to their creators.
How to clean shower doors: vinegar cleaner for hard water and soap scumAbbyPenny Family Reviews · Watch on YouTube ↗
How to remove hard water stains and soap scum from glass shower doorsJulia Caban · Watch on YouTube ↗
Removing etching and hard water deposits from glass (polishing)Detailing By Apex · Watch on YouTube ↗Why we don't justsell it to you
If the water marks on your glass won't wipe off, do this quick test before you buy EnduroShield.
A few things from your kitchen will tell you if your glass can still be saved.
Coating only works on clean, clear glass.
We would rather you test first than buy and be disappointed.
Water marks on glasscome in two kinds
Some sit on the surface. Some have already gone into the glass.
Once you see water marks, at least 7 or 8 in 10
are the second kind.
Test onesmall spot first
You already have what you need. Most of it is waiting.
Whether the marks on your glass are on the surface, or already inside the glass.
- 1Vinegar + 2 or 3 drops of dish soapPour plain white vinegar into a spray bottle, add 2 or 3 drops of dish soap and shake.
- 2Spray one small spotA small corner is enough. No need to do the whole panel.
- 3Leave it 30 minutes, keep it wetSpray it wet and let it soak.
- 4Wipe with a sponge, then rinseRinse it off and look from the side. Are the marks still there?
What you will see
Glass still new and clear? Skip the test and coat it now.
After wiping,which one is yours?
👇 Tap what you see. Your answer shows up right away.
↑ Tap one above. Your answer will show up here.
Good news,
your glass can be saved
The test spot is fully clear and wipes off with a sponge, so the marks are still on the surface.
You can buy EnduroShield right away. The EnduroClean in the kit takes them off the same way: clean the whole panel, then apply the coating.
Each kit comes with EnduroClean, the coating and the tools, so you can do it in one go.
At the very least,
stop it getting worse
A faint trace means a little of the marks have already gone into the glass.
If you can live with it, a layer of EnduroShield stops it getting worse, so the marks don't keep building up.
Clean the glass with EnduroClean first, then apply the coating.
It has gone into the glass,
cleaners won't help
The marks have gone into the glass. Basically no cleaner on the market can help, so hold off on the kit for now.
What your glass needs is polishing (grinding away a very thin layer of the glass surface). Coat it right after polishing so the marks don't come back. Our team can do this at your home.
Honestly, polishing can't get it to 100%. It usually gets to 90 to 95 out of 100: clear from a distance, with maybe a little left at the edges up close. We always look at your photos before we come over.
Ask about on-site polishing
‹ ›BeforeAfter
Still not surewhich one it is?
Take a photo of your glass and WhatsApp it to us. We will take a look for you.
WhatsApp us a photoHow long does the test take?
About 30 minutes. Most of it is waiting for it to soak.
My glass is new. Do I need to test it?
No. New glass is clean and clear, so just coat it. The sooner, the better.
How much is on-site polishing?
It depends on the size of your glass. WhatsApp us a photo and we will give you a price.
