Best glass coating for shower Enduroshield uses nanotechnology to create a durable and clear layer of protection suitable for all types of glass.
The invisible coating works by lining the tiny hills and valleys on the surface it’s applied to. The result is an invisible coating that repels water, grime and even oil based stains to make cleaning super easy!
You can apply it with no experience, in as little as 5 minutes to cleaned glass. Each pack contains everything you need including cleaner and polishing pad.
Simply clean the glass with the pre-treatment cleaner included, apply the EnduroShield protective layer, wait for it to dry and you’re covered for 3 years!
To keep your glass shower glass looking new, the glass needs to be cleaned each week using a damp microfibre cloth and a mild detergent to remove any soap scum, dirt or grime from the glass.
For exterior glass surfaces such as pool fencing, railings and windows, clean as required using water and a mild detergent (such as washing up liquid).
Wash the glass with a microfibre cloth, and dry with a good quality squeegee*. Alternatively, clean with a window cleaner and a cloth. For best results clean the glass in the shade to prevent streaking.
*Recommended squeegee brands are EnduroShield Professional Squeegee or Ettore
No the coating is only 2 molecules thick and is transparent. It will not crack or discolour over time. It is not like a lacquer or varnish.
Yes it can. This is the best glass coating for shower that the packs include a cleaning pad and a bottle of pre-cleaner that is great for removing build-up on existing glass including shower screens. However, if the staining is more extensive we also have a glass restoration service available in most states of Australia and would be happy to discuss this further with you. Please reach out to us on admin@enduroshieldpro.com if you’d like to chat further about this.
Yes, EnduroShield creates a water repellent surface which results in the water beading on the glass. The effect is similar to a non-stick fry pan.
EnduroShield should only be applied to frosted, acid-etched, or sandblasted glass in a factory setting before installation.
We don’t recommend DIY application on these surfaces, as applying EnduroShield by hand or with a trigger spray bottle can result in a streaky finish that may be difficult or impossible to correct.
For the best results, we recommend professional application. Feel free to contact us, and we can connect you with your nearest certified applicator.
